How to Raise a Floor With Wood

Giving your home a fresh new look doesn’t have to mean spending a lot of money. In fact, there are a lot of simple projects you can do yourself that will make a big impact. One example is raising the floor level in a room by installing wood planks. This job can be completed in just one day, and the results are impressive.

There are a few different ways to raise a floor, and each has its own benefits and drawbacks. You can use concrete, cinder blocks, or even bricks. However, one of the most popular ways to do it is by using plywood stairs. Plywood is strong and can hold much weight, making it the perfect material for stairs. Not only are they strong, but they also look good too.

Raising a floor to install plywood stairs can be daunting, but it can be a breeze with the right tools and techniques. This blog post will show you how to raise a floor with wood in your home. So if you’re ready to give your home a little elevation, keep reading!

How to Raise a Floor With Wood

Why Do You Need to Raise a Floor With Wood?

There are a few reasons why someone might want to raise their floor level with the wood. One reason could be accessibility, such as adding wheelchair ramps or making it easier for people with limited mobility to access the room.

Another reason could be aesthetics, as raised floors can add character and dimension to a space. And finally, raising the floor can also protect against moisture damage and potential flooding.

No matter the reason, raising a floor with wood can be a great solution. So let’s get started!

Tools and Materials Needed

Before you begin, ensure you have all the necessary tools and materials. You’ll need the following:

  1. Plywood sheets
  2. Saw
  3. Measuring tape
  4. Screws
  5. Drill
  6. Level
  7. Wood glue
  8. Wood filler
  9. Sandpaper
  10. Paint or stain (optional)

The number of materials needed will depend on the size of the room and the amount of elevation desired.

10 Easy Steps on How to Raise a Floor With Wood

Step 1: Measure and Cut Plywood

First, measure the area you want to raise using a measuring tape. Then, using a saw, cut the plywood sheets to fit the measurements. It’s important to have precise cuts so that your raised floor is even and stable. Because plywood comes in different sheet sizes, you may need to cut it multiple times to fit the desired area. Make sure to wear protective gear, such as goggles and ear protection, while cutting the plywood.

Measure the Area You Want to Raise

Step 2: Attach Plywood to Joists

Using a drill and screws, attach the cut plywood sheets to the floor joists. Make sure they are securely fastened before moving on to the next step. Otherwise, the raised floor may not be stable enough to walk on.

Step 3: Apply Wood Glue

Once all the plywood sheets are attached, apply wood glue along the seams for added stability. This step is optional but highly recommended for a strong, durable, raised floor. Don’t skimp on the glue – use enough to cover the entire seam and allow it to dry according to package instructions before proceeding. Because of the drying time, it may be helpful to do this step before attaching the plywood sheets.

Step 4: Install Floor Joists

If necessary, install floor joists along the length and width of the raised floor using screws or nails. These provide additional support for the plywood and any weight that will be placed on the raised floor. Be careful to avoid hitting any pipes or wires while installing the joists. Otherwise, consult a professional before proceeding.

Step 5: Install Subfloor

Once the joists are in place, install subflooring using nails or screws to secure it to the joists. This will provide an even surface for your finished flooring material, such as hardwood or tile. This step is optional but recommended for added stability.

Step 6: Install Finished Flooring

Now it’s time to install the finished flooring material of your choice. Make sure to use the appropriate adhesive or fasteners for the specific flooring material. There are different methods for installing hardwood, tile, carpet, or other materials, so do your research or consult a professional before proceeding.

Step 7: Fill in Any Gaps

Using wood filler, fill in any gaps between the plywood and floor joists. Let dry and sand smooth for a seamless finish. This step is optional but recommended because it gives the raised floor a more polished and professional appearance.

Step 8: Paint or Stain (Optional)

If desired, add a coat of paint or stain to the raised floor for added protection and a finished look. Choose a product that is suitable for the type of wood you are using. Be sure to follow all safety precautions and instructions listed on the product label.

Add a Coat of Paint or Stain

Step 9: Wait for Adhesives and Finishes to Dry

Allow all adhesives, finishes, paints, or stains to dry fully according to package instructions before walking on the raised floor or placing furniture or other items on it. It is important because the floor must be fully secure before bearing weight to prevent damage or injury.

Step 10: Enjoy Your Raised Floor

Your raised floor is now complete and ready for use. Enjoy the added height and new look in your home! Don’t forget to regularly clean and maintain the raised floor to keep it in good shape.

This guide is meant for informational purposes only. It is always best to consult a professional before undertaking any construction or renovation project in your home. Safety should always be a top priority.

You Can Check It Out to Make Your Own Hardwood Flooring

Additional Tips and Tricks

1. Consider hiring a professional if you are unsure about properly raising your floor.

2. Make sure to use pressure treated wood for areas that may come in contact with moisture, such as near bathrooms or exterior doors.

3. Double check all of your measurements before cutting and placing the wood to ensure a secure and stable raised floor.

4. Use spacers between the joists and subfloor to allow for air circulation and prevent mold growth.

5. Place a vapor barrier between the subfloor and the finished flooring to protect against moisture.

6. Ensure that doorways and other openings are properly adjusted to accommodate the raised floor height.

7. Don’t forget to add trim around the edges of the raised floor for a finished look.

I hope these tips and tricks help make your floor raising project successful! Good luck.

Ensure a Secure And Stable Raised Floor

5 Precautions You Need to Be Taken While Raising a Floor With Wood

1. Make sure to check for plumbing or wiring that may be running underneath the existing floor before beginning work.

2. Use a leveler to ensure that the new wood floor is even and stable.

3. Choose sturdy, high-quality wood for the new flooring to prevent sagging or warping over time.

4. Reinforce any weak spots, such as high traffic areas or areas where heavy furniture will be placed.

5. Double-check all nails and screws before walking on the new floor to prevent accidents. Overall, safety should be a top priority during the entire process.

Taking precautions and being attentive during the project will result in a successful and safe raised wood floor. Happy building!

What Kind of Wood Can You Use?

Some options for wood to use for a raised floor include plywood, hardwood, or pressure treated wood. It is important to choose a type that is suitable for the intended purpose and location of the raised floor.

For example, pressure treated wood may be necessary for areas with higher moisture levels or exposure to elements.

Do additional research to determine the best option for your project. Remember to choose a wood type that fits your budget and meets any necessary building codes or regulations.

You Can Check It Out To Waterproof Wood for Bathroom

Is It Difficult to Raise a Floor With Wood?

Raising a floor with wood can be challenging, but it is not necessarily difficult. It will take careful planning, accurate measurements, and proper execution to ensure the new wood floor is level and stable.

Some construction experience or knowledge may be helpful, but a determined DIYer can raise a wood floor with the proper research and guidance. It may also be beneficial to consult a professional for assistance or advice. Overall, the difficulty level will vary depending on the individual’s experience and specific project details.

Raising a Floor With Wood Can Be Challenging


So here is a brief overview of how to raise a floor with wood and some things to consider before starting the project.

Wood is a versatile and beautiful material that can be used to raise the floors in your home. If you’re looking for an inexpensive way to make your stairs look good, try using plywood. With some time and effort, you can turn a few sheets of plywood into a work of art that will add beauty and value to your home.

Always remember to prioritize safety and do proper research to ensure the success of your raised wood floor. Thanks for reading! We hope this article has been helpful. Happy building!

You Can Check It Out To Keep Plywood Doors From Warping

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment