One type of wood that is often stained with a dark grey color is orange wood. This can be achieved by using a pre-stain conditioner, then applying a deep gray stain. Grey wood tones are all the rage in home décor right now.
If you’re looking to give your furniture, trim, or accent pieces a modern look, staining them grey is the way to go! But what do you do if your wood is orange? Don’t worry – it’s easy to stain orange wood grey. In this post, we’ll walk you through how to stain orange wood grey. So grab your tools, and let’s get started!
What Color Neutralizes Orange Wood?
To neutralize an orange wood, you’ll need to use a deep gray color. Gray is typically the best choice when trying to achieve a subtle and stylish look, as it helps to mask any imperfections or inconsistencies in the wood’s grain.
Supplies You’ll Need for Staining Orange Wood Grey
Before you begin staining your orange wood grey, you’ll need to make sure that you have all of the supplies that are necessary for the job. Here are some of the things that you’ll need:
- Pre-Stain Conditioner
- Safety glasses
- Wood Stain – Choose a dark grey tone
- Paintbrush or foam brush
- Clean rags
- Polyurethane (optional)
- Sandpaper – 220 and 400 grit
Preparing the Wood for Staining
Before you begin staining orange wood, you need to make sure that it is properly prepped. Start by sanding the wood with 220-grit sandpaper, followed by a light sanding with 400-grit paper to remove any remaining roughness.
Wipe the dust off with a clean cloth or vacuum up any residual dust. Next, apply a generous coat of pre-stain conditioner to help the stain adhere evenly and prevent blotching. Allow this to dry overnight before continuing on to the next step.
10 Methods How to Stain Orange Wood Grey
1. Prepping the Wood
The first step in staining orange wood grey is to prep the wood. This means sanding the surface of the wood to rough it up and remove any existing finishes. Once the wood is sanded, it should be wiped down with a tack cloth to remove any dust. If the wood is unfinished, you may want to apply a wood conditioner before staining. Although this step is not necessary, it can help the stain to penetrate more evenly.
2. Applying a Pre-Stain Conditioner
Once the wood is prepped, a pre-stain conditioner should be applied. This will help to even out the absorption of the stain and prevent blotching. The conditioner should be applied according to the manufacturer’s instructions and allowed to dry completely before moving on to the next step. Make sure to wipe off the excess conditioner before staining. If the conditioner isn’t wiped off, it can affect the finished color of the wood.
3. Selecting the Stain Color
There are a variety of grey stains available on the market, so it is important to select one that will achieve the desired look. It is also important to test the stain on a piece of scrap wood before applying it to the project piece to ensure that you are happy with the color. Although dark grey stains are the most popular choice for staining orange wood, lighter shades of grey can also be used to achieve a more subtle effect.
4. Applying the Stain
Once the stain color has been selected, it is time to apply it to the project piece. The stain should be applied according to the manufacturer’s instructions using a clean, lint-free cloth. It is important to work in small sections and wipe away any excess stains immediately. While it is possible to apply a second coat of stain for a darker color, it is best to do a test on scrap wood first.
5. Allowing the Stain to Dry
After the stain has been applied, it needs to be allowed to dry completely before moving on to the next step. The drying time will vary depending on the type of stain used, so it is important to consult the manufacturer’s instructions. Try to avoid disturbing the stain while it is drying to prevent any streaking. If necessary, a fan can be used to speed up the drying process.
6. Applying a Topcoat
Once the stain is dry, a topcoat can be applied. This will help protect the stained surface and provide a bit of extra durability. There are a variety of topcoats available on the market, so it is important to select one that is compatible with the type of stain used. Topcoats should be applied according to the manufacturer’s instructions. While it is possible to apply multiple coats of topcoat for a more durable finish, it is best to do a test on scrap wood first.
7. Allowing the Topcoat to Dry
After the topcoat has been applied, it needs to be allowed to dry completely before using or handling the project piece. The drying time will vary depending on the type of topcoat used, so it is important again to consult the manufacturer’s instructions. It is important to avoid disturbing the topcoat while it is drying. While it may be tempting to test the finish by touching it, doing so can leave fingerprints on the finish.
8. Sanding Between Coats (Optional)
If multiple coats of topcoat are being applied, it may be a good idea to lightly sand the surface between coats. This will help even out the finish and provide a smoother surface. If sanding is being done, make sure to use fine-grit sandpaper and wipe away any dust before applying the next coat of topcoat.
Staining orange wood can be an easy way to give it an updated look. By following these steps, you can achieve a beautiful grey finish that will add depth and character to your project piece. And with a little patience, you can have a stunning stained piece that you can be proud of. Good luck!
9. Finishing Touches (Optional)
Once the topcoat has fully dried, it is time for the finishing touches. Adding sealants or waxes can help protect the finish and give it an extra bit of shine and durability. There are a variety of sealants and waxes available on the market, so make sure to select one that is compatible with the type of topcoat used. Following the manufacturer’s instructions for application, these finishing touches can help add protection and longevity to your project piece.
10. Enjoying Your Finished Piece
After all the hard work, it is time to enjoy your finished piece. Admire the beautiful grey finish you have achieved and revel in the fact that you have successfully stained orange wood! With proper care and maintenance, your project piece should be a part of your home for years to come. Although the process may have taken some time, the results will be worth it in the end.
By following these steps, you will be able to stain orange wood and achieve the beautiful grey finish that you desire. With a little patience and effort, you can create a stunning stained project piece that will look great in any home. Good luck!
Things to Consider When Staining Orange Wood Grey:
1. Choose the Right Stain:
When staining orange wood grey, it’s important to choose the right type of stain. A water-based acrylic stain or a pigmented lacquer are both good options for achieving a grey finish on orange wood. Be sure to test out different stains before committing to one.
2. Sand Down the Surface:
Before applying any kind of stain, make sure you sand down the surface of the wood with medium-grit sandpaper. This will help open up the pores in the wood and allow for better absorption of color from the stain.
3. Clean off Dust and Debris:
After sanding, use a damp rag to wipe away all dust and debris from the surface of the wood. This step is important to ensure that the finish will be even and consistent when it’s applied.
4. Apply a Sealer:
Before applying the stain, use a sealer to protect the wood from damage and fading. Sealers are available in both water-based and oil-based varieties, so be sure to choose one appropriate for your project.
5. Stain Evenly:
When staining, start at one edge of the piece of wood and work your way across with even strokes until you reach the other side. Make sure you’re applying an even coat over the whole surface for the best results.
6. Let Dry Completely:
After staining, let the piece dry completely before moving on to the next step. This can take anywhere from one to five days, depending on the temperature and humidity of your workspace.
7. Apply a Finish:
To protect your new grey finish, consider applying a clear coat or wax sealer over top once it’s completely dry. These will help lock in moisture and prevent fading or damage due to everyday wear and tear.
Applying a grey stain to orange wood is a great way to achieve a muted, weathered look. The first step is to sand the wood thoroughly so that the stain will be able to penetrate evenly. Next, apply the grey stain of your choice and allow it to sit for several minutes before wiping away excess with a clean cloth.
Once the stain has dried completely, you can add a topcoat of sealer or varnish if desired. With just a few simple steps, you can easily change the color of your wood furniture or décor!
Thanks for reading our blog post on how to stain orange wood grey! We hope you found it helpful and informative.
You Can Check It Out to Clean Mineral Spirits Off Wood