How to Make a Bench From a Log

Are you hosting a backyard barbecue and want to add some family-friendly fun? Are you looking for a fun outdoor game that will keep your family and friends entertained for hours? Look no further than the classic game of Cornhole, which has been enjoyed by friends and families for years!

How to Make a Bench From a Log

Learn how to hang your boards safely with our simple steps so you can get your game going in no time. Keep reading to find out how to hang your own set of cornhole boards – all it takes is a few simple steps to get playing!

With these straightforward instructions on how to make a bench from a log from us, setting up your cornhole boards will be a breeze. Plus, we’ll discuss why it’s important to hang them properly so that you can ensure maximum safety when playing—a must if there are little ones around. So gather the tools needed, and let’s get started!

How to Choose the Best Bench From a Log?

1. Free of Insects

The first step to making a bench from a log is to choose the right one. It should be strong and solid, free of rot or insect infestation, and have straight edges and a flat top. You may find these logs in local forests, lumber yards, or even online.

2. Quality of Wood

The quality of the wood is important when choosing a log for your bench. Look for wood that is strong and durable, such as oak or hickory, which will provide a sturdy base for your bench. Avoid softer woods like pine, which can easily damage over time from wear and tear.

3. Size Matters

When making a bench from a log, you’ll want to keep in mind the size of your log. If you have a smaller space, like a patio or balcony, then opt for logs that are shorter and lighter so they don’t take up too much room. However, if you plan on having plenty of seating for family and friends, then larger logs would be best.

The Quality of the Wood

Required Items for Building

Now that you have chosen the best log for your bench, the next step is to gather all of the necessary tools and supplies. You will need

  • A saw or axe
  • Sandpaper
  • Screws and brackets
  • Wood glue or nails

How to Make a Bench From a Log in 10 Easy Steps

Step 1: Measurement

Measure your log to determine the size of the bench you want. The right measurement will depend on the size of your log and the space you have available.

Step 2: Mark Cut Lines

Use a pencil to mark the cut lines for the seat, legs, and armrests. Leave enough material between each piece so that it can be easily connected after cutting.

Step 3: Cutting

Using a saw or an axe, cut along the lines you marked out. If you plan on using wood glue later, use a saw for more accurate cuts. While cutting, make sure to wear protective gear such as gloves and goggles.

Using a Saw or an Axe

Step 4: Shaping

Using sandpaper or a power sander, shape the edges of your cut pieces. You’ll also want to bevel the edges on your armrests for extra comfort when sitting. Shaping the wood also helps to make it look more aesthetically pleasing.

Step 5: Connecting

Once you have shaped your pieces, connect them by either using screws and brackets or wood glue. Make sure to leave enough space between each piece so they can fit together firmly without any gaps.

Step 6: Finishing

You may opt to add a finish to the wood in order to keep it protected from the elements and give it an attractive look. If so, you can use either paint or stain for your bench.

Step 7: Assembly

Once all of your pieces are connected, assemble them together by securely attaching them with screws and brackets. Make sure to use the right type of screws and brackets that are suitable for your wood type.

Step 8: Testing

Before you start enjoying your new bench, make sure it’s sturdy enough to sit on by testing it with a few people for added assurance. If all is good, then you can start using your new bench!

Use the Right Type of Screws and Brackets

Step 9: Enjoyment

Once your bench is assembled and tested, it’s time to enjoy! Invite friends or family over for a backyard barbecue and let them know that you made the bench yourself. Your guests will be impressed with your work, and they can even join in on the fun of Cornhole!

Step 10: Maintenance

Now that your bench is complete don’t forget to take care of it. Clean your bench regularly and inspect your screws every year to make sure they are still tight. If you applied a finish, follow the product instructions for proper maintenance so that it stays looking like new.

Congratulations! You’ve now learned how to make a bench from a log. Wasn’t that fun? With these instructions, you can take advantage of the great outdoors and bring some extra seating for your family and friends. Plus, this is a great way to be creative and get a sense of accomplishment when creating something with your own two hands.

8 Safety Precautions to Follow When Making a Bench from a Log

Making a bench from a log is an exciting DIY project, but it’s important to keep safety in mind. Here are 8 precautions to take before beginning the build:

Protective Eyewear and Gloves
  1. Make sure you have the proper tools for the job. Hand saws, hammers, and drills are all essential. Additionally, you’ll need safety equipment such as protective eyewear and gloves.
  2. Wear the right clothing for the job – it’s best to opt for long-sleeve shirts or jackets and pants that cover your entire leg. The right clothing can help protect you from potential injury.
  3. Make sure your workspace is free of clutter and debris. A clean, organized workspace will ensure a smoother process and reduce the chances of an accident occurring.
  4. Don’t work when you’re tired. A DIY project requires concentration and focus – being fatigued can increase the chance of an accident happening. Working in a well-lit environment will also help you stay alert.
  5. Never work alone. Having someone to help you with the project and watch out for potential hazards is invaluable.
  6. Be mindful of where your tools, materials, and debris are located while working – they should never be positioned close to walkways or other areas where people may come into contact with them.
  7. Take regular breaks and hydrate often – this will help ensure that you remain focused and don’t tire out too quickly.
  8. When using power tools, be sure to read the instructions carefully before use and make sure it is properly grounded. Additionally, always unplug the tool when it’s not in use or when changing bits or blades.

Following these safety precautions on how to make a bench from a log will help make your DIY project a success and ensure that you remain safe throughout the process!

5 Tips to Keep in Mind When Making a Bench From a Log

Apply a Water-resistant Sealant

Making a bench from a log is an exciting and rewarding project – but it’s important to keep in mind the following tips to ensure success:

  1. When selecting logs, choose ones that are relatively straight and free of blemishes. It’s best to use one with a diameter of at least 8 inches, as this will allow for more stability when building your bench.
  2. Consider purchasing a log-turning tool instead of manually turning the log with a sledgehammer and wedges – this will help make the process faster and less strenuous.
  3. Before cutting into the log, draw lines on it indicating where to cut as well as how deep to cut – this will help ensure that all pieces are precise and uniform.
  4. Make sure to apply a water-resistant sealant to the outer surfaces of your bench after construction is complete – this will help preserve its condition for many years to come.
  5. If possible, use logs that have already been dried out – freshly cut logs may need extra time (up to several months) before the bench can be built.

Following these tips on how to make a bench from a log will help make your bench-building process a breeze and ensure that you have a sturdy, beautiful piece to enjoy for years to come!

6 Common Mistakes to Avoid When Making a Log Bench

Once you’ve chosen the perfect log for your bench, there are a few common mistakes to avoid when crafting it. Here’s what to look out for:

  1. Not using the right tools. Make sure you use an appropriate saw or axe to cut and shape the log. Don’t try and make sharp cuts with something not meant for the job.
  2. Not checking for rot or insects. Even if the log looks good on the outside, you should check inside for any signs of decay or infestation before making your bench.
  3. Not using enough screws and brackets in your assembly process. When connecting two logs together, make sure to use enough screws and brackets that will ensure a strong connection.
  4. Not leveling the logs correctly. Make sure you use a level to ensure the logs are all the same height before securing them together permanently.
  5. Not sanding down the log edges properly. You should always sand down your log edges after cutting them, making sure to remove any splinters or sharp edges that may cause injury or discomfort.
  6. Not treating the wood to protect it from weather and pests. Treat the bench with a sealant that will help protect it against rain, wind, sun damage, and insects.

Making your own log bench is an enjoyable experience that allows you to craft something unique for your home or garden. Just remember these common mistakes so you can make sure you get it right the first time. Have fun crafting!

Be sure to check out our other helpful bench-building tutorials so you can learn even more tips and tricks for creating beautiful log benches.

Not Sanding Down the Log Edges Properly

Frequently Asked Questions

How Long Will It Take?

It depends on the size of the log you’re using, as well as how much time and effort you’re willing to invest in the project. Generally speaking, it usually takes at least a few hours to complete the job. The right tools can make a huge difference, too – be sure to have the right saws, drills, and other equipment before you start.

What Kind of Log Should I Use?

The best kind of logs to use are those that are dry or seasoned, which means they’ve been allowed to air-dry over time. Avoid using softwood logs, as they tend to be too light and soft for the job. Hardwoods such as oak, walnut, or cedar are usually best for making furniture.

Can I Use Pre-Cut Logs?

Yes – pre-cut logs can work just fine for this project. You’ll still need to finish preparing it correctly, though. Make sure to sand it down and seal all the surfaces to protect them against moisture damage.


Creating a bench from a log can be an enjoyable and rewarding experience. Not only is the end result aesthetically pleasing, it also has its own character that comes with the unique shape of the log you use. Depending on the availability of materials and tools, creating a bench from a log can be as simple or intricate as you please.

It can be a learning experience in traditional woodworking methods while also giving the opportunity to customize your piece to your own tastes.

Ultimately, this DIY project gives everyone who’s willing to give it a try the ability to accomplish something unique and personal that will not only turn heads but provide beautiful memories for many years to come. Follow the guide and tips on how to make a bench from a log to create your own beautiful log bench!

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment