How to Split Wood With a Chainsaw

Splitting wood is a chore, but it’s a necessary one. Not only does splitting wood keep you warm in the winter, but it also provides you with firewood for your fireplace or stove. Splitting wood can be much easier than using an ax if you have a chainsaw. This article will show you how to split wood with a chainsaw. Keep reading to learn more.

How to Split Wood With a Chainsaw

Summary: This tutorial will teach you how to split wood using a chainsaw. Follow these steps to get started:

1) Place the wood in the chainsaw’s path and ensure that it is properly secured.

2) Drive the chainsaw blade into the wood and hold down the trigger.

3) Keep your arms and shoulders positioned in a natural position and use your body weight to pull the chainsaw towards you.

4) Continue pulling the chainsaw towards you until the blade has cut through the wood.

5) Reverse the motion of the chainsaw and remove the wood from the saw.

What Causes Wood to Split?

There are a few things that can cause wood to split. The most common is the direction of the grain. If the grain runs parallel to the log’s length, it’s more likely to split. Another thing that can cause wood to split is the amount of moisture in the wood. If the wood is too dry, it will split more easily.

Additionally, if the wood is frozen, it will also split more easily. The other thing that can cause wood to split is the size of the log. If the log is too big, it will be more difficult to split. Lastly, if the log is already under stress, it will be more likely to split.

Why Should You Split Wood With a Chainsaw?

There are a few reasons why you should split wood with a chainsaw. First, it’s much faster than using an ax. Second, it’s much easier on your back. Third, it’s less likely to cause injury. Additionally, it’s more efficient, meaning you’ll use less energy to split the wood. Another reason to split wood with a chainsaw is that it’s less likely to cause damage to your property. Finally, it’s more fun! Using a chainsaw is the way to go if you’re looking for a way to make splitting wood more enjoyable.

Step by Step How to Split Wood With a Chainsaw

1. Choose the Right Chainsaw

The first step in learning how to split wood with a chainsaw is to choose the right chainsaw. If you’re going to split wood with a chainsaw, you need to make sure you have the right chainsaw. The most important thing to consider is the size of the chainsaw. If you have a small log, you’ll need a small chainsaw. If you have a large log, you’ll need a large chainsaw. The next thing to consider is the type of chainsaw.

If you’re going to be splitting wood regularly, you’ll want to choose a gas-powered chainsaw. If you’re only going to be splitting wood occasionally, you can choose an electric chainsaw.

Split Wood With a Chainsaw

2. Check the Chain

Once you have the right chainsaw, the next step is to check the chain. You don’t want to start splitting wood with a dull chain. A dull chain will make it more difficult to split the wood, and it could cause the chainsaw to kick back. To avoid these problems, make sure you sharpen the chain before you start cutting.

3. Find a Level Spot

The next step is to find a level spot to split the wood. You don’t want the chainsaw to get stuck in the ground, so make sure you’re on level ground. To find a level spot, look for an area that’s free of debris. Once you’ve found a level spot, clear the area of any rocks or sticks. First, remove any small rocks or sticks. Then, dig a small trench around the area to remove any larger rocks. Finally, level the ground with your foot.

4. Place the Log

Once you’ve found a level spot, it’s time to place the log. If you’re splitting a large log, you may need help to lift it into place. To do this, roll the log onto its side. Then, have one person lift the end of the log while the other person pushes it into place. If you’re splitting a small log, you can lift it yourself.

5. Start the Chainsaw

Now that the log is in place, it’s time to start the chainsaw. Pull the cord to start the engine if you’re using a gas-powered chainsaw. If you’re using an electric chainsaw, plug it in and then press the power button.

6 Hold the Chainsaw Properly

Once the chainsaw is started, it’s time to hold it properly with both hands. The first thing you need to do is grip the handle with your right hand. Then, wrap your left hand around the back of the chainsaw. You may also need to hold the front handle with your left hand. If you’re right-handed, you’ll hold the chainsaw with your right hand on the trigger and your left hand on the front handle. If you’re left-handed, you’ll do the opposite. Avoid holding the chainsaw with just one hand.

Hold It Properly With Both Hands

7. Position the Chainsaw

The next step is to position the chainsaw correctly. You want the blade to be perpendicular to the log. The best way to do this is to stand directly in front of the log. Then, position the chainsaw so that the blade is pointing directly at the center of the log. If you’re right-handed, the blade should be on the right side of the log. If you’re left-handed, the blade should be on the left side of the log.

Avoid holding the chainsaw at an angle. This can make it more difficult to split the wood, and it could cause the chainsaw to kick back.

8. Start Cutting

Once the chainsaw is in position, it’s time to start cutting. Push the blade into the log and then squeeze the trigger. The blade will start to cut through the log. Keep your hands steady as you cut through the log. Avoid moving the chainsaw back and forth. This can cause the blade to bind and kick back. If the blade starts to bind, release the trigger and let the blade stop spinning.

Then reposition the blade and start cutting again. As you’re cutting, you may need to adjust your grip on the chainsaw. If the log is large, you may need to hold the front handle with your left hand to keep the chainsaw steady.

9. Apply Even Pressure

As you’re cutting through the log, apply even pressure to the blade. Avoid putting too much pressure on the blade. This can cause the blade to bind and potentially damage the saw. Instead, let the saw’s weight do the work as you guide it through the wood. If the blade starts to bind, simply back it out and start again.

10. Cut Halfway Through the Log

Once you’ve cut through the log, stop the chainsaw and reposition it. The goal is to cut halfway through the log, so you’ll need to ensure that the chainsaw is in the right position before cutting again.

Cut Halfway Through the Log

11. Split the Log

Once you’ve cut through the log, it’s time to split it. To do this, release the trigger and let the blade stop spinning. Then, position the blade near the end of the cut. Next, put your foot on top of the log and push down. The log should be split in half. If it doesn’t, try hitting the end of the log with a piece of wood or a hammer. Once the log has been split in half, you can remove the halves. Avoid touching the blade with your hands as you remove the logs.

12. Repeat the Process

Repeat the process until all of the logs have been split. If you’re splitting a large number of logs, take a break every few logs to avoid fatigue. Try to work steadily, so you don’t overheat the saw or wear yourself out. It’s important to have a good technique to work efficiently and safely.

13. Turn Off the Chainsaw

Once you’ve split the logs, please turn off the saw and let it cool down before storing it. Make sure that the saw is turned off and the chain has stopped moving before you put it away. It’s also a good idea to clean the saw after each use. This will remove any dirt or debris that could potentially damage the saw.

Tips and Warnings on How to Split Wood With a Chainsaw

Tips

  1. Always use a sharp chain. A dull chain will cause the saw to bind in the cut, making it difficult to control.
  2. Make sure the bar is properly lubricated before each use.
  3. Use gloves and ear protection when operating the saw.
  4. Be careful of kickback when cutting. Kickback can occur when the tip of the saw hits a branch or other object, causing the saw to jerk back towards the operator.
  5. Follow all safety precautions when using any power tool.
Use a Sharp Chain

Warnings

  1. Never try to split wood that is too large for your saw. This can damage the saw and be dangerous.
  2. Use caution when cutting near power lines.
  3. Be aware of your surroundings and watch for other people or animals when operating the saw.
  4. Never leave the saw running unattended.
  5. Always turn the saw off and disconnect it from the power source before performing any maintenance or repairs.

Is it Better to Split Wood Wet or Dry?

Splitting wood when it’s dry is generally considered better because it makes the job easier and safer. Wet wood can be harder to split because it’s heavier and not as brittle as dry wood. It can also be more dangerous because it can cause the blade to slip, resulting in injuries. Additionally, wet wood has a higher moisture content, which can lead to rot and decay if left unseasoned for a long time.

Splitting it while damp can hasten this process. On the other hand, dry wood is brittle, making it easier to split and burn more efficiently. Splitting dry wood also allows for seasoning, which further reduces the moisture content, resulting in better-burning properties. Overall, while it’s possible to split wet wood, it’s more efficient, safer, and better for firewood to do it while dry.

Can You Cut a Tree Lengthwise With a Chainsaw?

Technically, yes, you can cut a tree lengthwise with a chainsaw. However, doing so safely and effectively requires a fair amount of skill and caution. The process involves making cuts lengthwise along the tree trunk, starting at the top and working your way down. These cuts must be made carefully to avoid kickback and ensure that the saw stays on track.

Using a sharp chainsaw and taking breaks is important to prevent overheating or fatigue. Additionally, ample space, protective gear, and a solid work surface are necessary for a successful and safe cut. Overall, while cutting a tree lengthwise with a chainsaw is possible, it’s a challenging task that should only be attempted by experienced professionals or skilled DIYers with the proper equipment and precautions in place.

How Long Do You Wait Before Splitting Wood?

When it comes to splitting wood, timing is crucial. If you’re looking to split fresh or green wood, it’s best to wait at least six months from the time it was cut. This is because fresh wood has a high moisture content and is, therefore, harder to split. By waiting for a few months, the moisture in the wood will have a chance to evaporate, making it easier to split with an axe or a maul.

On the other hand, if you don’t want to wait that long, you can opt for seasoned wood. Seasoned wood has been allowed to dry for at least six months after being cut and can be split much more easily than fresh wood. This is because the moisture content will have already reduced significantly, making the wood softer and easier to work with.

It’s also important to consider the weather conditions when splitting wood. If it’s too cold outside, the wood may be too frozen and hard to split. If it’s too hot, the wood may be too dry and prone to splitting in unexpected ways. It’s best to aim for a temperature range between 40-70 degrees Fahrenheit for optimal wood-splitting conditions.

Conclusion

So there you have it! How to split wood with a chainsaw. With these 13 steps, you’ll be splitting wood like a pro. Just remember always to follow safety precautions when using any power tool. Thanks for reading!

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment