How to Use Unicorn Spit Gel Stain

Unicorn spit might sound like a mythical creature’s beverage of choice, but it’s a type of gel stain perfect for adding beautiful color to wood surfaces.

If you’re looking for a fun, unique way to add some color to your woodworking projects, then you need to check out unicorn spit gel stain! This fantastic product can give your woodworking pieces a beautiful, glossy finish that will stand out.

In this blog post, we’ll show you how to use unicorn spit gel stain and provide tips for getting the best results. Keep reading to learn more!

Summary: Unicorns are always so beautiful and colourful. But when they get stained, they can be quite frustrating. This Unicorn Spit Gel Stain tutorial will show you how to use this unique stain to make your unicorns look beautiful again!

How to Use Unicorn Spit Gel Stain

What is Special About Unicorn Spit?

Unicorn Spit is a gel stain on wood, glass, metal, and other surfaces. It is available in various colors, including some glittery and metallic shades. Unicorn Spit is easy to use and can create unique and vibrant results.

Unicorn Spit can be applied with a brush, sponge, or other applicators. Using the stain in thin layers is best, building up the color as desired. Unicorn Spit can be diluted with water to create a lighter shade or left undiluted for a more concentrated look.

Unicorn Spit dries quickly and does not require any sealant. However, it can be sealed with a clear coat if desired. Unicorn Spit is non-toxic and safe for children and pets.

9 Steps on How to Use Unicorn Spit Gel Stain

Here are nine easy steps to follow when using Unicorn Spit gel stain:

Step 1: Prep Your Work Surface

No matter what you’re staining, starting with a clean, dry, and smooth surface is important. Then, when working with wood, sand down rough spots and wipe away any dust before proceeding, this is very important if you want your stain to look its best. Otherwise, the finish will be uneven.

Step 2: Choose Your Stain Color

Unicorn Spit offers a wide range of colors, so you’re sure to find the perfect color for your project. However, the color you see in the bottle may not be what you get. To test it out, apply a small amount of stain to scrap wood or cardboard piece and let it dry.

 Find the Perfect Color

Step 3: Apply a Base Coat (Optional)

If you’re working with bare wood or a light-colored surface, you may want to apply a base coat of paint before proceeding with the gel stain. This will help ensure coverage and prevent the final color from being too light. Also, this is very important if you work with a light-colored Unicorn Spit Gel Stain.

Step 4: Pour Out Some Stain

Start by pouring a small amount of gel stain onto your work surface. You can always add more if needed, but it’s best to start with less and build up to the desired opacity. This step is also essential to avoid messing unless people want gel stains on their work surfaces.

Step 5: Apply the Stain

Now it’s time to start staining! To do this, pour a small amount of gel stain into a bowl or container. Then, using a clean rag or brush, apply the stain to your project in long, even strokes. For best results, work in small sections, and don’t let the stain dry before moving on to the next area. Otherwise, you may end up with a sticky or tacky finish.

Step 6: Let It Dry

After you’ve applied the gel stain, let it dry for at least an hour before proceeding. If you’re working on a larger project, you may need to let it dry overnight. On the other hand, if you’re in a hurry, you can speed up the drying process by using a hair dryer set on low. Just be sure not to get too close, or you may damage the finish.

Let It Dry

Step 7: Apply a Second Coat (Optional)

If you want a darker or more opaque finish, you can apply a second coat of gel stain. Just be sure to let the first coat dry completely before proceeding. Otherwise, you risk making a muddy-looking mess. And may ruin your project.

Step 8: Seal It In

Once you’re happy with the final color, it’s time to seal it in. For best results, use a clear polyurethane or lacquer. This will protect the finish from wear and tear and make cleaning easier. Just be sure to apply a thin, even coat. Otherwise, you may end up with a sticky or tacky finish.

Step 9: Let It Cure

After you’ve applied the sealer, let your project cure for 24 hours before using it or putting it on display. This will give the sealer time to set and dry thoroughly. Otherwise, you risk damaging the finish.

After all that work, you can finally enjoy your newly stained project! Whether a piece of furniture, a set of cabinets, or even a simple picture frame, gel stain can add a beautiful and unique touch. Have fun experimenting with different colors and techniques to create your perfect look.

What Do You Mix Unicorn Spit With?

Unicorn Spit can be mixed with any other water-based product. However, it is best to use a stir stick and not your finger to mix it up. How much you mix is up to you and what look you are going for. A good rule of thumb is two parts Unicorn Spit to 1 part another water-based product.

Once you have your desired color, you can apply it to any surface. Wood, glass, metal, ceramic, and fabric are all great surfaces for Unicorn Spit. Just ensure the surface is clean and free of grease or dirt before starting.

Apply It to Any Surface

How Long Does It Take Unicorn Spit to Dry?

Unicorn Spit typically takes 24-48 hours to dry. However, depending on the temperature, humidity, and airflow in your home, it may take up to 72 hours for Unicorn Spit to fully cure. If you’re in a hurry, you can speed up the drying process using a hairdryer on the low setting.

How Do You Prepare Wood for Unicorn Spit?

The first step is to clean the wood. You can use a TSP solution or another type of cleaner; just make sure to rinse it well afterward. If the wood is new, you may not need to do anything more than this.

Next, sand the surface of the wood. You don’t need to remove all the paint or finish, but you should rough up the surface so the gel stain can adhere.

Once the wood is prepared, you can apply the Unicorn Spit. Again, it’s best to do this in thin layers, applying and then wiping away excess until you get the desired color. You can also mix colors to create custom hues.

Allow the Unicorn Spit to dry completely before sealing with a topcoat. This will help protect the stain and ensure that it lasts many years.

Do You Need to Seal Unicorn Spit?

Unicorn Spit is a gel stain, and like all stains, it will eventually fade if left unsealed. You can use any type of sealer with Unicorn Spit, but we recommend using a water-based topcoat for the best results. Sealers help protect your finish from scratches, moisture, and UV damage.

To seal your Unicorn Spit project, apply one or two coats of sealer with a brush or roller. Let the sealer dry completely before using or handling your project.

Now you know how to use Unicorn Spit get creative! This product is versatile and can be used on all surfaces. Try staining wood furniture, picture frames, or concrete.

Use Unicorn Spit Get Creative!

How to Apply Unicorn Spit?

Unicorn Spit is a specialty glaze made from a blend of various acrylic paints, stains, and glazes. It is commonly used to give furniture, cabinets, doors, and other wood surfaces a unique and one-of-a-kind look. To apply Unicorn Spit, begin by sanding the wood surface with an orbital sander and medium-grit sandpaper.

Once the surface has been adequately sanded, use a rag to wipe away any dust or debris. Next, apply a thin layer of Unicorn Spit directly to the wood using either a brush or a roller. Allow the glaze to dry for at least three hours before adding additional coats as desired.

The more coats that are applied, the deeper and more vibrant the colors will be. Once the desired look has been achieved, use a clean, dry rag to buff the wood surface to bring out the natural shine.

Can You Polyurethane Over Unicorn Spit?

Yes, you can get polyurethane over Unicorn Spit. However, we recommend using water-based polyurethane for the best results.

For optimal protection, we recommend using three coats of polyurethane. To apply polyurethane over Unicorn Spit, apply it with a brush or roller in long, even strokes. Make sure to allow each coat of polyurethane to dry completely before applying the next one.

If you need to remove polyurethane from Unicorn Spit, you can do so with a solvent such as mineral spirits. Simply apply the solvent to a clean cloth and rub it over the area until the polyurethane is removed.


Unicorn Spit is a gel stain that can add color and depth to wood projects. It comes in many different colors, and the results are beautiful. 

If you read the instructions and heed the warnings about how to use unicorn spit gel stain, you should have no trouble using Unicorn Spit gel stain. Simply apply it to your project with a brush or cloth, and then wipe away the excess. The results will be stunning! 

Have you ever used Unicorn Spit gel stain? What did you think of it? Share your thoughts in the comments section below.

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment