How to Stop Wooden Slats Falling Out

If you have ever owned a wooden slatted bed, you may have experienced the issue of the slats falling out. This can be frustrating and even dangerous if they fall while someone is sleeping in the bed. Luckily, there are some things that can be done to help prevent this from happening. 

How to Stop Wooden Slats Falling Out

In this post, we will discuss how to stop wooden slats falling out and some ways to fix the problem. We will also look at some alternative types of beds that may be a better option for you. So, if you are having trouble with your wooden slatted bed, keep reading!

Should You Screw down Wooden Bed Slats?

When it comes to securing wooden bed slats, you have two main options: screwing them down or using clips. If you choose to screw the slats down, make sure that you use screws long enough to penetrate the frame and secure it in place. You’ll also want to make sure that your screws are rust-resistant and specifically designed for wood.

As an alternative to using screws, you can opt for clips instead. Clips are specially designed brackets that help keep your bed slats in place without having to use any type of hardware. They come in various sizes and materials, so you should be able to find one that fits your needs. 

Both screwing and clipping will help give your bed extra stability, so either option is a great choice. Ultimately, it’s a matter of personal preference and which method you feel most comfortable using. Whichever option you choose, make sure to check your bed slats periodically for any signs of wear or tear. With a little bit of extra care and attention, you can keep your bed safe and secure for years to come.

10 Methods on How to Stop Wooden Slats Falling Out

1. Use a Drill to Make Pilot Holes  

Use a drill to make pilot holes in the top and bottom of each slat. These pilot holes will help to prevent the slats from splitting when you screw them into place. If the slats are narrow, use a countersink bit to create a shallow recess for the screw heads. Although this may take more time, it will make a better fit and help to prevent the slats from slipping out.

2. Countersink the Screws 

After drilling the pilot holes, countersink the screws so that they are flush with the surface of the wood. This will ensure that the screws do not protrude and catch on anything. If you are using screws with a Phillips’s head, use a countersink bit for the best fit. While you are countersinking, make sure to keep the screws aligned with each other so that all the slats will fit properly.

You Can Check It Out to Connect Rafters to Ridge Beam

Using Screws With a Phillips's Head

3. Use Clamps to Hold the Slats in Place 

Use clamps to hold the slats in place while you screw them into place. This will help to prevent the slats from moving around while you work. If you have multiple clamps, you can use them to hold multiple slats in line at once. This will be especially useful when working with wider pieces of wood.  Make sure to place the clamps carefully so that they do not damage the wood.

4. Use a Drill Bit that Is Slightly Smaller than the Screws 

When drilling the pilot holes, use a drill bit that is slightly smaller than the screws you will be using. This will ensure that the screws fit snugly into the holes and do not slip out. If you are using smaller screws, use a smaller drill bit. While if you are using larger screws, use a larger bit. Make sure to use the right size bit for each screw so that the fit is secure.

5. Use Decking Screws 

When attaching the slats to the frame, use decking screws instead of nails or other types of fasteners. Decking screws are specifically designed for outdoor use and will stand up to weather better than other types of fasteners. Although they will cost more, they are worth it in the long run. Try to find screws that are corrosion-resistant for the best results.

Use Decking Screws Instead of Nails

6. Predrill Holes for Nails 

If you decide to use nails instead of screws, predrill the holes for the nails to prevent them from splitting the wood. When predrilling, use a drill bit that is slightly smaller than the nails you will be using. If the slats are narrow, you may want to use a countersink bit in order to create a slight recess for the nail heads. This will help to ensure a better fit and prevent the slats from slipping out.

7. Use Galvanized Nails 

If you decide to use nails, be sure to use galvanized nails, as they will resist rust better than non-galvanized nails. Galvanized nails are available at most hardware stores. If the slats are used outdoors, you may want to use stainless steel nails instead, as they will provide better rust protection. Although these are more expensive, they will provide a better long-term solution.

8. Use an Adhesive 

In addition to or instead of using fasteners, you can also use an adhesive to attach the slats to the frame. Adhesives provide a strong bond and can help to prevent movement between the slats and frame. For best results, make sure to use an adhesive that is specifically designed for outdoor use. This will help to ensure that the bond holds up in all weather conditions.

Use an Adhesive to Attach the Slats

9. Use a Paint or Stain 

After the slats are attached, you may want to finish them with paint or stain. This will help to protect the wood from the elements and give it a finished look. If you are using paint, make sure to use one that is specifically formulated for outdoor use.  Alternatively, you can use an oil-based stain for a more natural look. Whichever product you choose, make sure to apply it evenly and allow it to dry completely before using the furniture or putting anything on top of it.

Following these steps will help ensure that your slatted furniture is properly installed and securely attached to its frame. Proper installation will help to prevent damage and ensure that your furniture lasts for years to come. With just a few simple steps, you can create beautiful outdoor furniture pieces that will last through any weather.

Things to Consider While Stop Wooden Slats Falling Out

1. Measure the Blind Slats:

Before installing any hardware to prevent wooden slats from falling out, it is important to measure the blind accurately. This will help you purchase the right size of hardware and ensure an easy installation process.

2. Anchor the Bottom Rail:

The bottom rail is the part that prevents a fall of the slats when they are open while blocking light coming in when they are closed. You can anchor it with screws that come along with special mounting brackets or drill small holes into both sides of the bottom rail, place plastic anchors within them, and then use wood screws to attach it securely to wall studs or window frames.

3. Install Cleats:

Along with anchoring the bottom rail, installing cleats may be necessary. The cleats will attach to the slats and ensure that they stay in place even when opened completely. You can either purchase pre-made cleats or make your own with basic tools.

4. Secure the Top Headrail:

To prevent wooden slats from falling out at the top of the blinds, you can secure them by fixing a small screw into each end of the top rail of the blind and then using plastic anchors to attach it securely to wall studs or window frames. Ensure that all screws are tightened properly so that they do not loosen over time.

Ensure That All Screws Are Tightened Properly

5. Install Cordless Systems:

If you want an easier way to operate blinds without the hassle of cords, you can install cordless systems. These systems feature a hidden spring that helps to rewind the slats and keep them in place when opened or closed.

6. Keep the Blind Clean:

Over time, dust and dirt can build up on the wooden slats, which makes it difficult for them to stay in place. Regular cleaning and maintenance are necessary to ensure that they don’t fall out. Simply use a soft cloth and mild detergent to wipe down the blinds occasionally.

7. Use Plastic Clips:

If all else fails, using plastic clips might be your only option to prevent wooden slat from falling out of the blinds. The clips work by attaching themselves onto each top rail of the blind and then holding the slats in place. They are an inexpensive solution but may not be as durable as other methods mentioned above.


Wooden slats are a great way to add privacy and style to your home, but they can be a pain when they start falling out. Luckily, there are a few easy ways to fix the problem. With a little time and effort, you can have your wooden slats looking like new again in no time. 

At the end of the day, it’s important to remember that a little bit of knowledge and effort can go a long way in protecting your home. By following these simple tips on how to stop wooden slats falling out, you can help ensure that your wooden slats stay firmly in place for years to come. Thanks for reading!

You Can Check It Out to Stop Wood From Leaking Sap

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment