How to Put a Lock on a Door Without Drilling

This is a great skill to have if you’re trying to secure your home without damaging the door or frame. It can also be used if you don’t have access to power tools or aren’t familiar with installing locks traditionally. Installing a lock without drilling requires using an adhesive-based lock system, such as those made by Lockitron or August. These systems come with a lock, an adhesive pad, and installation hardware.

How to Put a Lock on a Door Without Drilling

The locks are designed to be installed without any tools, just by peeling off the backing from the adhesive and pressing it onto the door frame. By avoiding drilling, you can ensure that your door remains in good condition and looks better for longer. In this blog post, we will cover the basics of how to put a lock on a door without drilling so that you can pick the best option. 

Materials You Will Need

  • Door knob
  • Screwdriver
  • Tape measure
  • Pencil
  • Adhesive hook and eye latch
  • Hammers or pliers
  • Chisel or file
  • Utility knife
  • Sandpaper or emery cloth
  • Wood screws

Step-by-step Instructions for How to Put a Lock on a Door Without Drilling

Step 1: Inspect the Door

Ensure the door has the hardware for a lock without drilling. Look to see if there is an existing latch or deadbolt on the door, as this will provide a secure way to install a new lock without having to drill holes in the door.

Step 2: Measure the Door and Lock

Be sure to measure carefully before purchasing a lock. The lock must fit within the existing hardware, so you’ll need to ensure that it is compatible with what is already on the door. Head to your local home improvement store or online retailer and purchase a suitable lock for your door. Be sure to check if there are any special instructions for installation.

Measure Carefully Before Purchasing a Lock

Step 3: Removing the Existing Hardware

Once you have the new lock, it’s time to remove the old hardware from the door. This is best done by unscrewing and removing the screws that hold it in place. After removing the existing hardware, place the lock plate into the opening on the door and attach it with screws. Make sure that it is firmly in place and secure before continuing with the installation.

Step 5: Installing the Lock Cylinder

Place the lock cylinder into the lock plate and secure it with screws. Be sure to check if there are any specific instructions for the type of lock you are installing. A striker plate is necessary to keep the lock cylinder in place and secure it from jiggling or loosening over time. Attach this to the door frame using screws.

Step 6: Test Out The Lock

Before attaching the handle, test the lock by locking and unlocking it with the key. This will let you know if any adjustments need to be made before securing the handle. Once you’ve tested the lock and it works correctly, attach the handle to the door. Make sure that this is securely fastened, as this is the only thing that will be holding the lock in place. Finally, check that the lock is secure by testing it again with the key. Once you are satisfied with its performance, you can safely use your new non-drilled lock.

Tips for How to Put a Lock on a Door Without Drilling

  1. Ensure the door is a suitable candidate for a non-drilling lock installation. Look for doors with pre-cut holes or mortises, as these will make installing a lock without drilling easier.
  2. Measure the thickness of the door and frame to ensure that your chosen lock will fit properly in the space available.
  3. Take a look at the types of locks available without drilling and choose one suitable for your needs. Consider keyless entry options such as push-button or combination locks.
  4. Take appropriate safety precautions when working with tools, including wearing protective eyewear and gloves to avoid injury.
  5. Follow the instructions that come with your lock carefully, paying attention to any specific information regarding compatibility and installation.
  6. Test the lock once it has been installed to ensure that it is functioning properly and securely.
  7. Ensure all keys or combinations associated with the lock are secured in a safe place.
Ensure That It is Functioning Properly

By following these simple tips, you can easily and safely install a lock on your door without drilling. Doing so will help keep you and your belongings safe from intruders or unwanted visitors.

How Long Does It Take to Install a No Drill Lock? 

The installation time for a no-drill lock depends on the complexity of the setup. Generally, it takes about 10 to 20 minutes to install most types of locks without drilling. It may take longer if you’re installing a sliding door lock or any other type of complicated setup. You should also factor in an extra few minutes to ensure you install the lock correctly.

If you have the necessary tools and follow all of the instructions carefully, it shouldn’t take more than half an hour to install a no-drill lock properly. It’s important to ensure everything is right before tightening the screws and locking your door. This will ensure that your home is secure and protected from intruders.

Is There Any Risk in Installing a No Drilling Lock on Your Door? 

When protecting your home and family, it’s important to ensure that your doors are secure. Installing a lock on a door without drilling can seem like an easy way to keep intruders out. However, there are certain risks associated with installing a no-drilling lock on your door. The first risk is that the lock may not be as secure as if it were drilled into place.

When a lock is secured with screws, it’s much harder to break or remove than one that’s just sitting on the door frame and held in place with adhesive strips. Another risk of installing a no-drilling lock is that the adhesive used may not hold up over time. Many adhesives can become loose or ineffective when exposed to moisture, heat, and other environmental factors.

This could potentially cause your lock to come loose and be vulnerable to tampering. Finally, a no-drilling lock may not meet local building codes. Before installing any type of lock on your door, ensure it meets all applicable safety standards and regulations in your area.

How Often Do You Need to Check Your No Drilling Lock to Ensure Security? 

When it comes to Putting a Lock on a Door Without Drilling, security is of utmost importance. Many people wonder how often they should check their no-drilling lock to ensure that it remains secure. The answer depends on various factors, such as the type of lock you have installed, how often it is used and whether or not you are using additional security measures.

Type of Lock You Have Installed

For instance, if you have installed a mechanical lock that is not frequently used, it will generally require less maintenance than an electronic or digital lock which needs to be powered and connected to a power source. Additionally, smart locks that are connected to your home’s Wi-Fi network will need more frequent checks to ensure they remain secure and operational.

How Do You Maintain Your No Drill Lock and Ensure That It Remains Secure Over Time? 

  • Inspect the lock period to ensure it is securely attached and not weakening over time.
  • Make sure that all screws are tight and secure, with no signs of degradation or rusting.
  • Check for any signs of wear on the adhesive tape and replace it if necessary to ensure a secure bond between the door and the lock.
  • When cleaning the door and surrounding area, use mild detergent and a soft cloth to avoid damaging the lock.
  • If your no-drill lock has an electronic component, such as a fingerprint scanner or keyless entry system, be sure to follow all manufacturer instructions for maintenance and battery replacement so that it remains in good working order.
  • If your no-drill lock includes a door handle, be sure to lubricate the mechanism regularly and wipe it down with a soft cloth to ensure that it remains clean and free of dirt or dust buildup.
  • Finally, you should test your no-drill lock periodically to ensure it is functioning properly and responding to the correct inputs.
  • If you ever notice a decrease in performance or any other issues, contact the manufacturer as soon as possible to ensure that your lock remains secure over time.
Test Your No-Drill Lock Periodically

By following these simple steps, you can keep your no-drill lock in top condition and ensure that it remains secure for years to come. With proper maintenance and regular testing, your no-drill lock will serve you well and keep your home safe from unwanted intruders.


In conclusion, there are many ways to lock a door without drilling or using power tools. Depending on the type of door and its hardware, you can use a keyed knob, latch guard, slide bolt lock, surface mount latch, magnetic lock, deadbolt security plate, or even an adhesive strip as an alternative.

While these methods may not provide the same level of security as a drilled and mounted deadbolt, they offer much-needed peace of mind and protection. With the right combination of locks, you can effectively secure any door without having to drill or use power tools. I hope this article has been beneficial for learning how to put a lock on a door without drilling. Make Sure the precautionary measures are followed chronologically. 

You Can Check It Out to Fill Hinge Holes in Door Frame

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment