How to Make Wood Slabs for Centerpieces

Making wood slabs for centerpieces is a fun and easy project that can be completed in just a few hours. Using a few simple tools and supplies, you can create beautiful, customized centerpieces for your next event. Here’s how to get started.

How to Make Wood Slabs for Centerpieces

Making your own wood slabs for centerpieces is a fun, easy, and inexpensive way to add a unique touch to your event. You can use any wood you like, and the process is simple. You can have beautiful, one-of-a-kind centerpieces that will impress your guests in just a few steps. Keep reading for instructions on how to make wood slabs for centerpieces.

Summary: Instructions: 1. Start by finding some wood that you’d like to use for your centerpiece. Be sure to choose a piece of wood that is at least 2 inches wide and 1 inch thick. 2. Next, mark the center of the wood slab with a pencil. 3. Using a saw, cut the wood slab in half, then mark the center of each half with a pencil. 4. Sand the edges of the wood slab, then prime and paint it your desired color. 5. Place one half of the wood slab onto the center of the marked area, and position the other half of the wood slab around it. 6. Use a screwdriver to tighten the screws that hold the two halves of the slab together.

What Are Wood Slabs:

Wood slabs are simply large cuts of wood that can be used for a variety of purposes. They are often used as table tops or countertops but can also be used for crafts or decor. Wood slabs can be found at most hardware stores or lumber yards and are usually quite affordable.

Assuming you have your wood slab (or multiple slabs), the first thing you need to do is sand it down. You want to make sure the surface is nice and smooth so that your centerpiece will look professional. Once you have sanded down the wood, you can then stain or paint it however you like.

Once your wood is stained or painted, it’s time to start decorating! You can use wood slabs as the base for a variety of different centerpieces. For example, you could use a wood slab as the base for a floral arrangement or as the top for a wedding cake. You could even use multiple wood slabs to create a tiered centerpiece. There are endless possibilities when it comes to decorating with wood slabs.

What Type of Wood Is Used for Centerpieces?

The most popular types of wood used for making centerpieces are pine and cedar. You can also find slabs made from other types of wood, but these two are the most common. Each type of wood has its own unique grain pattern and color, so you can choose the one that best suits your decorating style.

Use for Centerpieces

Pine is a softwood that is light in color, with a straight grain. It is easy to work with and takes stain and paint well. Cedar is a reddish-brown hardwood with a tight grain. It is also easy to work with, but it can be more difficult to find in the right size and thickness for your project. Pine and cedar are both widely available at most lumberyards and home improvement stores.

Tools and Materials:

  • 1-2 wood slabs (depending on the size of your project)
  • Sandpaper (coarse and fine grits)
  • Safety goggles
  • Stain or paint (optional)
  • Decorations of your choice (flowers, greenery, ribbon, etc.)

15 Step by Step Process on How to Make Wood Slabs for Centerpieces:

Step 1. Gather Your Tools and Materials.

The first step is to gather all of the tools and materials you will need to make your wood slab. You will need a saw, a drill, clamps, sandpaper, wood glue, and a finish of your choice.

Step 2. Choose the Type of Wood You Want to Use.

There are many different types of wood to choose from when it comes to wood slabs. Some of the most popular choices include:

  • Pine
  • Oak
  • Maple
  • Cherry
  • Walnut

Each type of wood has its own unique grain pattern and color. So, take some time to consider what look you’re going for before making your final decision. Once you’ve chosen the type of wood you want to use, it’s time to move on to step three.

Gather Your Tools  And Materials

Step 3. Cut the Wood Into Slabs.

The next step is to cut the wood into slabs. How thick you make the slabs are entirely up to you, but we recommend making them 1-2 inches thick. To do this, you’ll need a saw. If you don’t have access to a saw, you can ask your local hardware store to make the cuts for you.

Step 3. Sand the Slabs.

Once the wood is cut into slabs, it’s time to sand them down. This will help to smooth out any rough edges and make the wood more pleasant to the touch. To sand the slabs, you’ll need sandpaper and a sanding block. Start with coarse grit sandpaper and work your way up to a finer one.

Step 4. Apply Wood Glue.

The next step is to apply wood glue to the slabs. This will help to keep them together and prevent them from cracking. You can either use a brush or your finger to apply the glue. Be sure to apply it evenly and to all of the edges.

Step 5. Clamp the Slabs Together.

Now that you have applied the glue, it is time to clamp the slabs together. This will help ensure that they dry in the correct position and do not slide around. You can use any type of clamp, but C-clamps work well. Place the clamps along the edges of the wood slabs and tighten them until they are snug.

Allow the glue to dry for at least 24 hours before removing the clamps. Once the clamps are removed, you can sand the edges of the wood slabs to make them smooth. If desired, you can also apply a finish to the wood.

Step 6. Attach the Slabs to the Base.

Now that the slabs are dry attaching them to the base is time. This is where the adhesive strips come in handy. Start by peeling off the backing on one of the strips and attaching it to the top of one of the slabs. Then, press the slab onto the base. Repeat this process for each of the slabs.

Step 7.   Add the Finishing Touches.

Now that the slabs are attached to the base, it is time to add the finishing touches. Start by adding any trim or molding that you desire. You can also add felt pads to the bottom of the slabs to protect your furniture. Once the trim and felt pads are in place, your wood slabs are finished and ready to be used as centerpieces!

Cut the Wood  Into Slabs

Step 8. Add the Decorations.

The final step is to add the decorations. This can be anything from flowers to candles to Mason jars. If you’re using flowers, you’ll want to put them in a vase or jar, so they don’t wilt. You can also use fake flowers if you want your centerpiece to last longer. If you’re using candles, be sure to use ones that are safe for indoor use. You don’t want to start a fire! Mason jars are a great way to add some light to your centerpiece. You can put LED lights in them, or even candles.

Step 9. Enjoy Your New Centerpieces!

Now that your wood slabs are finished, you can enjoy them as centerpieces in your home. These slabs can be used to display pictures, candles, vases, or anything else you can think of. So get creative and have fun decorating your new centerpieces.

You Can Check It Out to Trim Wood Edges

Tips and Warnings on How to Make Wood Slabs for Centerpieces:


  1. Look for the right type of wood. Some woods are better suited for certain projects than others. For example, balsa is a very soft wood that is easy to work with, but it is not very strong.
  2. Make sure your wood is dry before beginning your project. Wet wood can be warped and difficult to work with.
  3. Use a sharp blade when cutting your wood. A dull blade will make the cuts more difficult and can cause the wood to splinter.
  4. Sand your wood before you begin working with it. This will help to create a smooth surface and prevent splinters.
  5. Be careful when using power tools on your wood. Always wear safety glasses and follow the manufacturer’s instructions.


  1. Woodworking can be dangerous. Always take proper safety precautions and use common sense.
  2. Be aware of your surroundings and don’t work in a cluttered or too small area.
  3. 3. Always wear proper safety gear, including gloves, glasses, and a dust mask.
  4. 4. Never leave power tools unattended. Turn them off and unplug them when you are finished using them.
  5. Be careful when working with sharp tools and always keep them stored properly when not in use.
Use a Sharp Blade


Making wood slabs for centerpieces is a great way to add natural beauty to your event. Not only are they easy to make, but they can be customized to fit any color scheme or theme. Here’s how to make wood slabs for centerpieces.

If you’re looking for a beautiful and affordable centerpiece option, making your own wood slabs is the perfect solution. With just a few simple steps, you can create stunning centerpieces that will wow your guests. Have you tried this DIY project before? What tips do you have to share? If you have any questions or comments about How to Make Wood Slabs for Centerpieces, please leave them below. We’d love to hear from you!

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment