How to Flip Deck Boards With Nails

It may seem daunting, but replacing deck boards can actually be quite manageable. Even more impressive is that you don’t need expensive power tools to do it – all you need are some basic materials and a bit of know-how.

How to Flip Deck Boards With Nails

In this blog post, we’ll show you how to flip deck boards with nails in no time at all! We’ll explain the steps required and list out the necessary supplies needed so that your outdoor space looks as beautiful as ever. Read on to find out our expert tips for tackling this project without breaking a sweat!

Supplies You Will Need to Flip Deck Boards With Nails

  1. Pry bar
  2. Hammer
  3. Nails
  4. Protective eyewear and gloves
  5. Replacement boards (if needed)

Step-by-Step Guidelines on How to Flip Deck Boards With Nails

Step 1: Prep the Board

Before removing any boards, it’s important to prepare them for flipping. Start by examining the existing boards and identify any nails that need to be removed. Once you have located all of the nails, use a pry bar or hammer to remove them carefully. Be sure to wear protective eyewear and gloves during this process. For preparing the board for flipping, a good rule of thumb is to remove the nails until there are no more than 4 inches of nails left in the board.

Be Sure to Wear Protective Eyewear

Step 2: Flip the Board

Once you have prepped the boards and removed all of the necessary nails, it’s time to flip them over. Use a pry bar or hammer to carefully lift up the board and rotate it over. Make sure that you have a firm grip on the board so that it does not accidentally slip out of your hands! While flipping, be sure to keep the edges of the board even to avoid any damage.

Step 3: Hammer in the Nails

Once the board is flipped over, it’s time to hammer in the nails. Make sure that you are using a good quality nail and place it firmly into its original spot on the board. Once the nail is in place, use a hammer to secure it firmly into the board. Make sure to hammer each nail in place carefully to avoid damaging the board. 

Step 4: Check for Stability

After completing steps 1-3, you can check the stability of your newly flipped deck boards by stepping on them and testing their sturdiness. If they feel stable and secure, congratulations – you have successfully flipped over your deck boards with nails! If the boards feel wobbly or uneven, you may need to adjust the nail placement or even replace some of the boards.

Step 5: Replace Boards (if needed)

If you need to replace any of the boards, it is important to make sure that they are the same size and shape as the original deck boards. When shopping for replacement boards, measure out your current board so that you get a perfect fit. Once you have the right-sized boards, you can begin the same process of prepping and flipping as before.

Measure Out Your Current Board

And there you have it! After following these steps, your deck boards should look as good as new. With a little bit of patience, attention to detail, and some basic supplies, flipping deck boards with nails is a simple job that anyone can handle. Good luck and happy flipping!

Additional Tips and Tricks to Flip Deck Boards With Nails

1. Make sure to wear proper safety gear and clothing when flipping the boards so that any nails that are exposed don’t injure you in the process.

2. Before starting, remove all nails from the deck board with a pry bar or hammer and nail puller. If they do not come out easily, use a nail punch to set them below the surface of the wood so they won’t cause any injuries.

3. If needed, use a circular saw to trim off any excess deck board material and make sure it fits in its new spot on the deck.

4. Place the flipped board in its new spot and secure it with galvanized deck screws, making sure to countersink the heads of the screws and cover them with wood putty.

5. If you need to replace a board that has been damaged beyond repair, use a jigsaw to cut off the existing board and install a replacement in its place.

6. Once all the boards have been flipped, check for any exposed nails and remove them.

7. Finally, apply a fresh coat of stain or paint to protect the boards from moisture and other environmental conditions.

Following these steps will ensure that your deck board flipping job is done properly and safely so you can enjoy your newly refinished deck for years to come.  Good luck!

Things You Should Consider While Flipping Deck Boards With Nails

1. When flipping the deck boards, make sure that the nails are removed from each board before flipping it over. This will prevent damage to the deck boards and keep them secure when flipped.

2. Measure and mark where you want to flip the board in order to ensure an even result.

3. Use a pry bar to lift the board up and away from its fasteners. Be careful not to damage surrounding boards or deck framing during this process.

4. To prevent splitting the wood, drive additional nails into the opposite side of the deck board before flipping it over.

5. Carefully turn the board onto its new position, driving in more nails where needed.

6. Finally, use a hammer or a handsaw to cut off the excess nails from the top side. This will give your deck a clean and finished look.

7. To ensure your safety, wear safety glasses when flipping boards in order to protect your eyes from flying debris.

8. Additionally, use work gloves when handling nails and boards to minimize the chance of getting a splinter or cut.

Measure and Mark Where You Want to Flip

With the following considerations, flipping your deck boards with nails should be a breeze. With patience and care, you can easily make your deck look brand new again.  So get out there and start flipping! Good luck!

Precautions Need to Follow for Flipping Deck Boards With Nails

1. Make sure you are wearing protective gear such as safety glasses, gloves, and a dust mask. This will help protect you from flying debris.

2. Remove any nails that may have come out of boards during the removal process. Be careful not to strip the wood while doing so, as this could weaken it and cause it to break when flipped.

3. Inspect the boards for any rotting or damage that may have occurred before flipping them over. If there is visibly rotting, it might be best to replace that board entirely instead of flipping it.

4. Measure the space between each board and make sure to leave enough room for expansion when nailing them back together.

5. Use galvanized nails to avoid corrosion and rusting over time.

6. Make sure the boards are securely nailed into place before walking on them. It is important to double-check that all nails are properly set.

7. Treat any exposed wood with a sealant or protective coating, such as varnish, to guard it against further water damage.

Flipping deck boards with nails is a relatively quick and easy process that can save you time and money when renovating your outdoor space. With the right precautions and tools, you can make sure the job gets done safely and efficiently.

Frequently Asked Questions

Can I Use Nails to Flip Deck Boards?

Yes, you can use nails to flip your deck boards. However, it is important to ensure that the nails are long enough and fit tightly into the joists so they will hold up over time. Additionally, it’s best practice to predrill the holes for each nail to ensure that they are placed in the correct spot and don’t cause any splitting or other damage.

What Is the Best Way to Remove Nails From Deck Boards?

The best way to remove nails from deck boards is with a nail puller tool. This tool allows you to grab onto the head of the nail, then leverage it out of the wood. Be sure to wear safety glasses and protective gloves when using this tool, as it can cause flying debris or splinters if not used properly.

Do I Need to Replenish the Nails After Flipping the Boards?

No, you do not need to replenish the nails after flipping the boards. However, if you can see that the nails are beginning to loosen or become corroded, it is best practice to replace them with new ones. This will help ensure your deck boards stay secure and last longer.

Ensure Your Deck Boards Stay Secure


Learning how to flip deck boards with nails is a great skill to have and is an easy DIY project. Whether you’re looking to save some money or just enjoy a weekend project, flipping deck boards can add a touch of style and personality to the outdoors while also extending your life. Before working on this project, it is important to remember safety first: always wear protective eyewear and gloves when handling sharp tools.

Additionally, make sure all nails are straightened before attempting to remove them from the board. Also, keep in mind that there are different techniques for success depending on the type of nail and board used. With this guide demonstrating flipping deck boards with nails, you now have all the knowledge needed for your next outdoor project. It may take time, but the results will surely be worth it!

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment