Installing gas struts on a toy box is a great way to make it easier to open and close. Not only will it be less strenuous for you, but it will also keep the lid from slamming shut and hurting your child’s fingers. Installing gas struts on a toy box is a pretty straightforward process, but there are a few things you need to know before you get started.
In this blog post, we’ll walk you through the steps required to install them correctly and provide some information on how to install gas struts on a toy box. So without further ado, let’s get started!
Summary: If you’re looking to install gas struts on your toy box, follow these simple steps:
1. Locate the toy box’s hinge points.
2. Measure the distance between the hinge points and the toy box’s edge.
3. Buy the appropriate size gas strut.
4. Install the gas strut by tightening the bolt that comes with it.
5. Test the toy box’s stability by gently rocking it back and forth.
Tools You Will Need to Install Gas Struts on a Toy Box
- A ratchet and socket set
- A drill with a 1/4 inch hex bit
- A Phillips head screwdriver
- Safety glasses
- Work gloves
8 Steps on How to Install Gas Struts on a Toy Box
Step 1: Install Gas Struts
you need to install a gas strut on your toy box. Doing so will make it easier to open and close the lid and help keep the top from slamming shut. There are a few things you need to do to install gas struts on your toy box:
First, you need to find the correct size struts for your toy box. The size will depend on the lid’s weight and the box’s height. Once you have the right size struts, you need to attach them to the cover and the container. This can be done with screws, nails, or even adhesive tape. After the struts are attached, you need to adjust them so that the lid opens and closes smoothly. This can be done by changing the tension on the braces.
Step 2: Measure the Right Size
You’ll need to know the weight of the lid and the size of the gas struts you’re installing. Most hardware stores will be able to help you with this. Once you know these measurements, you can purchase your gas struts.
Step 3: Install the Mounting Brackets
The next step is to install the mounting brackets. You’ll need to use screws and wall plugs to do this. The number of screws will depend on the weight of the lid. Once the brackets are in place, you can screw them into the toy box.
Step 4: Attach Gas Struts to the Lid
It is now time to attach the gas struts to the lid of your toy box. Start by aligning the brackets with the holes on the top. If everything lines up, then go ahead and screw in the bolts by hand. Be careful not to over-tighten them, as this could strip the threads or damage the brackets.
Once the bolts are in place, it’s time to attach the gas struts. First, extend the support rod until it is about 4-5 inches longer than your lid. Then, line up the end of the rod with the hole in the bracket, and push it through until you see the threaded portion on the other side.
Now, take the included nut and screw it onto the threaded end of the gas strut. Be sure to tighten it well, but be careful not to over-tighten it as this could damage the brace. Repeat this process for the other side, and your gas struts should now be securely attached to your lid.
Step 5: Adjust the Tension
Once the gas struts are in place, you’ll need to adjust the tension. This is done by turning the adjustment screws on the end of the gas strut. Turn them clockwise to increase pressure and counterclockwise to decrease tension. Again, you’ll want to experiment with different stress levels until you find one that works best for your toy box.
Step 6: Prevent Gas Struts from Squeaking
you can prevent gas struts from squeaking by regularly lubricating them with a silicone-based lubricant. Apply the lubricant to the piston rod, working it in until you see it come out of the other end. Wipe away any excess lubricant before moving on.
If your gas struts are starting to squeak, you can try lubricating the piston with a silicone-based lubricant; however, if the noise persists, you may need to replace the struts.
Step 7: Lubricate Gas Struts
You can lubricate gas struts with these simple steps. Remove the end caps from the gas struts. Then clean off any dirt or grime that has built up on the strut. After that, apply a light coat of lubricant to the piston rod. Next, replace the end caps and screw them back on until they are snug. Finally, test the gas struts to make sure they are working properly.
Step 8: Test It Out
After all of this, you need to test the gas struts to ensure they are properly mounted and working as intended. Close the lid of the toy box and let go. If the struts are installed properly, the lid should stay up on its own. If it slowly falls down or doesn’t stay up, you’ll need to adjust the tension.
Therefore, that’s how you install gas struts on a toy box (or any other piece of furniture). It’s really not that difficult, but it does require a little bit of time and patience. But once you’re done, you’ll be able to enjoy the convenience of having automatic opening and closing for your toy box lid.
10 Benefits of Installing Gas Struts
- Keeps your toy box lid open while retrieving toys, preventing accidental closures that can cause injuries.
- It Helps prevent little fingers from getting caught in the toy box lid.
- Reduces wear and tear on the hinges of your toy box.
- It Makes it easier to open and close the lid of your toy box, even when it’s full of toys.
- Keeps the lid of your toy box from slamming shut, preventing damage to the toys inside.
- Helps to keep the contents of your toy box clean and dust-free.
- It Makes it easy to access the contents of your toy box, even when it’s stored in a high place.
- Prevents the lid of your toy box from banging against walls or furniture, minimizing noise and damage.
- Allows you to store your toy box in a tight space, such as under a bed or in a closet.
- It Makes it easy to move your toy box from one room to another.
How to Replace Worn Out Gas Struts
Over time, gas struts can wear out and need to be replaced. Here’s how you can do it yourself:
1. First, remove the old gas struts from your toy box. If they’re attached with screws, unscrew them using a drill or screwdriver. If they’re attached to rivets, use a drill to remove their hooks.
2. Next, measure the length of the old gas struts and compare them to the size of the new ones. The measurements should be the same.
3. If they’re not the same length, you’ll need to adjust the location of the mounting brackets on your toy box. To do this, mark the new location of the mounting brackets with a pencil.
4. Use a drill to create pilot holes for the new screws or rivets.
5. Finally, attach the new gas struts to your toy box using screws or rivets. Make sure that they’re tightened securely.
Now you know how to install gas struts on a toy box! This simple addition can make retrieving toys much easier and safer for you and your child.
How to Troubleshoot Common Gas Strut Problems
If your gas struts are not working correctly, there are a few things you can do to troubleshoot the problem.
1. First, check to ensure the gas struts are adequately inflated. If they’re not, use a pump to grow them to the proper pressure.
2. Next, check if the gas struts are appropriately aligned. If they’re not, adjust their position until they’re aligned correctly.
3. Finally, check to see if the gas struts are loose. If they are, tighten them using a wrench.
If you still have problems with your gas struts, please contact a professional for assistance.
Conclusion
Installing gas struts on your toy box is a simple and easy way to improve your storage solution’s safety, function, and appearance. They are available in various sizes and weights to find the perfect setting for your needs. In most cases, installation is a quick and easy process that can be completed in just a few minutes.
Installing gas struts on a toy box is a great way to keep the lid from slamming shut. With a few simple tools and a little know-how, you can install gas struts in no time. But, first, follow the manufacturer’s instructions carefully to avoid damaging the props or the toy box.
If you read the article, you know the benefits of installing gas struts on your toy box and how to gas struts on a toy box. You also learn how to troubleshoot common gas strut problems.
