How to Use Pine Sol on Laminate Floors

If you’re looking for an affordable and simple way to keep your laminate floors clean, Pine-Sol is a great option. Not only is it inexpensive, but it’s powerful enough to tackle tough messes as well as gentle enough not to damage the floor.

How to Use Pine Sol on Laminate Floors

In this post, we’ll explore how to use pine sol on laminate floors, and some common mistakes that people make when using it. Whether you need help removing scuff marks or simply want to deep-clean your floors, this guide will have you covered!

Why Use Pine Sol on Laminate Floors?

Pine-Sol is a versatile and popular cleaning solution that has been used for decades. It contains natural pine oil, which gives it a distinct scent and powerful cleaning properties. When diluted with water, Pine-Sol can be safely used on laminate floors to remove dirt, grime, and stains. It is also non-abrasive, making it safe for your floors and suitable for regular use.

Moreover, Pine-Sol can be used to remove odors and freshen up the floor without leaving any residue behind. This makes it a great option for homes with pets or families with children who tend to make messes on the laminate floors often.

Step-by-step Guidelines on How to Use Pine Sol on Laminate Floors

Step 1: Prepare the Solution

You’ll need a bucket, warm water, and Pine-Sol to create a cleaning solution. Follow the instructions on the Pine-Sol bottle to dilute it with water in the right proportions. Usually, a quarter cup of Pine-Sol is enough for one gallon (3.8 liters) of water. Mix it well until it forms a consistent and clear solution.

Step 2: Remove Surface Dirt and Dust

Before you start mopping, it’s crucial to remove any loose dirt, dust, or debris from the laminate floor. You can use a broom, vacuum cleaner, or microfiber cloth for this job. This step will prevent scratches and ensure a more thorough cleaning process. While sweeping, pay special attention to corners and edges that often accumulate dirt.

You Can Use a Broom

Step 3: Mop the Floor

Dip a mop or microfiber cloth into the Pine-Sol solution and wring it out until it’s barely damp. Never use a soaking wet mop on laminate floors as excess water can cause damage. Start mopping from one side of the room to the other, making sure to cover the entire surface. If you come across any stubborn stains, let the solution sit on them for a few minutes before scrubbing with a soft-bristled brush.

Step 4: Rinse Your Floors

Once you’ve mopped the entire floor, it’s essential to rinse away any residue left behind by the Pine-Sol. Use a clean mop or cloth soaked in plain water and wring out well before rinsing. You can also use a spray bottle filled with water to target specific areas if needed.

Step 5: Dry Your Floors

After rinsing, it’s crucial to dry your floors thoroughly. Use a clean and dry microfiber cloth or mop to remove any excess water from the surface. Alternatively, you can also use a towel to pat down the floor gently. Don’t leave any standing water on laminate floors as it can cause damage over time.

Following these simple steps will help you achieve clean and shiny laminate floors without any damage caused by Pine-Sol.

Additional Tips and Tricks to Use Pine Sol on Laminate Floors

Use a Clean and Dry Microfiber Cloth
  1. Always read the label for specific instructions and safety precautions before using Pine Sol on your laminate floors.
  2. To avoid leaving streaks, use a microfiber mop instead of a string or sponge mop when applying Pine Sol.
  3. For tough stains, spray undiluted Pine Sol directly onto the stain and let it sit for a few minutes before wiping it away with a damp cloth.
  4. For a deeper clean, mix equal parts Pine Sol and warm water in a bucket and use a mop to apply it onto the floor.
  5. Avoid using Pine Sol on unsealed or unfinished laminate floors as it may cause damage.
  6. Never mix Pine Sol with other cleaning products, as this can create harmful fumes and potentially damage your floors.
  7. Always test a small, inconspicuous area of your floor before using Pine Sol on the entire surface to ensure compatibility.
  8. If you have pets or small children, make sure to keep them away from the area being cleaned until the Pine Sol has completely dried.
  9. To maintain the shine of your laminate floors, use a mixture of equal parts vinegar and water to mop after using Pine Sol.
  10. If you accidentally spill Pine Sol on your skin, wash it off immediately with soap and water to prevent irritation.

Following these tips and tricks will help you effectively and safely use Pine Sol on your laminate floors, leaving them clean and smelling fresh. Remember to always test a small, inconspicuous area first before using Pine Sol on larger areas of your floor.

With proper usage, Pine-Sol can be a great cleaning solution for your laminate floors. So, keeping these tips in mind, go ahead and confidently use Pine Sol to maintain the cleanliness and beauty of your laminate floors.

Common Mistakes to Avoid for Using Pine Sol on Laminate Floor

Mixture of Equal Parts Vinegar and Water
  1. Make sure to follow the instructions on your bottle of Pine Sol before using it. The concentrated formula can be too harsh for laminate floors, and using the undiluted solution can result in discoloration or damage to the floor.
  2. Do not use a mop or cloth that is too wet when cleaning with Pine Sol. Excess moisture can seep into the laminate boards and cause swelling, warping, or separation.
  3. Avoid using abrasive tools such as scrub brushes or steel wool on your laminate floors. These can scratch and damage the surface, making it more susceptible to staining and discoloration.
  4. Do not let Pine Sol sit on your laminate floors for too long. Always follow the recommended amount of time on the bottle and rinse thoroughly with clean water afterward. Leaving Pine Sol to air dry can cause a film or residue to build up, leaving your floors looking dull and streaky.
  5. Never mix Pine Sol with other cleaning products, especially those containing ammonia or bleach. This can create toxic fumes and cause harm to both you and your floors.
  6. Do not use Pine Sol on unsealed or unfinished laminate floors. The solution can seep into the boards and cause damage from within.
  7. Avoid using too much Pine-Sol when cleaning. A little goes a long way, so start with a smaller amount and add more if needed. Using too much Pine Sol can result in leftover residue, leaving your floors sticky and attracting more dirt and debris.
  8. Do not use hot or boiling water when cleaning with Pine Sol. This can cause the laminate boards to warp or buckle, resulting in an uneven and damaged floor.

By avoiding these common mistakes, you can ensure that your laminate floors stay clean and beautiful while using Pine Sol as a cleaning solution. Remember to always read the instructions on the bottle and follow them carefully for the best results.

Regular maintenance and proper use of Pine Sol will help keep your laminate floors looking like new for years to come. So, it is better to be cautious and avoid these mistakes to protect your laminate flooring investment. Keep these tips in mind and enjoy a clean and shiny floor with the help of Pine Sol. Happy cleaning!

Frequently Asked Questions

Can I Use Pine-sol on All Types of Laminate Flooring?

Pine-Sol can be safely used on most types of laminate flooring, including Pergo, Armstrong, and TrafficMaster. However, it is always best to check the manufacturer’s instructions for specific cleaning recommendations.

How Do I Dilute Pine-Sol for Use on Laminate Floors?

It is recommended to dilute one-fourth cup of Pine-Sol in one gallon of water for regular cleaning. For tougher stains, you can use a stronger solution by increasing the amount of Pine-Sol up to half a cup per gallon of water. Be sure to always test a small, inconspicuous area first before using the solution on the entire floor.

Use a Mop to Clean Laminate Floors

Can I Use Pine-Sol as a Spot Cleaner for Stains on Laminate Floors?

Yes, Pine-Sol can be used as a spot cleaner for stains on laminate floors. Simply apply a small amount of undiluted Pine-Sol directly onto the stain and let it sit for a few minutes before wiping it away with a damp cloth.

Will Pine-Sol Leave Residue on Laminate Floors?

When used according to the recommended dilution, Pine-Sol should not leave any residue on laminate floors. However, if you notice any residue after cleaning, simply rinse the area with water and dry thoroughly.

Can I Use a Mop to Clean Laminate Floors with Pine-Sol?

Yes, you can use a mop to clean laminate floors with Pine-Sol. However, be sure to wring out the mop well before using it on the floor to avoid excess water from seeping into the seams of the laminate and causing damage.


Now you know how to use pine sol on laminate floors! Just follow the recommended dilution, test on a small area first, and be sure to thoroughly rinse and dry the floor afterward. With Pine-Sol, you can keep your laminate floors looking clean and fresh without worry. Happy cleaning!

So next time you’re wondering how to keep your laminate floors looking clean and shiny, remember that Pine-Sol is a safe and effective option. Just follow the instructions and you’ll have beautiful floors in no time! Don’t forget to check out our other helpful cleaning tips and products for all your household needs. Keeping your home clean doesn’t have to be a chore with Pine-Sol by your side. Try it out today!

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment