How to Install Murphy Door

Murphy Doors are a great way to create extra space in your home without taking up valuable floor space. They can be used as a pet door or even an entryway into another room or closet, allowing you to make the most of the available space. Installing a Murphy Door is easier than you might think and can add both practicality and style to your home.

How to Install Murphy Door

Installing a Murphy door has many advantages. Firstly, it can save space in your home as it does not take up any additional floor area when open. Secondly, its unique design adds an aesthetic touch to your home and allows for easy access between rooms or levels. Thirdly, a Murphy door helps separate areas of the house and can create additional privacy. In this blog post, You will learn in detail how to install murphy door.

Tools You Will Need

  • Tape measure
  • Level
  • Power drill and bits
  • Hammer
  • Screwdriver
  • Circular saw or jigsaw
  • Stud finder
  • Carpenter’s square
  • Chalk line
  • Wood shims

Step by Step Processes for How to Install Murphy Door

Step 1: Inspect the Murphy Door Prior

Before you start the installation process, it is important to inspect your Murphy Door carefully. Make sure that all parts are there and in good condition. The tools necessary for installation include a drill, a jigsaw, a wood saw, screws, a level, and wood glue. Additionally, gather the necessary materials such as plywood, trim pieces, and a frame kit.

Step 2: Measure & Cut Your Door Opening

Measuring and cutting your door opening is important for ensuring that the Murphy Door fits properly into the wall space. Make sure to double-check your measurements before cutting any wood. Assemble the Murphy Door frame according to the instructions provided with your kit. Make sure that all pieces are securely connected before moving on to the next step.

The Murphy Door Frame According

Step 3: Secure the Frame in Place

Once you’ve assembled your frame, secure it into place using wood screws and construction adhesive. Measure and cut the plywood pieces according to the measurements of your Murphy Door frame. Again, make sure that all pieces are accurately cut before moving on.

Step 4: Attach the Plywood Pieces to the Frame

Use wood screws and construction adhesive to attach each plywood piece to the frame. Make sure that all pieces are securely attached before moving on. Measure and cut the trim pieces according to your measurements, then attach them using wood screws or construction adhesive.

Step 5: Add Finishing Touches

Once all of the pieces are in place, add any finishing touches you would like. This could include painting or staining the wood as well as adding decorative hardware such as handles. You’ve successfully installed your new Murphy Door. Now you can enjoy the convenience and beauty that it offers. 

By following these steps, you can be sure that your Murphy Door is properly installed and ready to use. This door should last for years to come with proper care and maintenance.

Safety Tips for How to Install Murphy Door

  1. Safety glasses and gloves should always be worn when installing a Murphy Door, as it can involve sharp edges, drilling, and other potentially hazardous activities.
  2. Make sure to mark any boundaries or restricted areas where the installation cannot take place due to electrical wiring or plumbing that might be in the way.
  3. If you have to drill into walls, use an appropriate length masonry bit to penetrate the desired surface material safely.
  4. Securely fasten the hinges of the Murphy Door in place with screws and ensure they are firmly attached before attempting to lift the door into place.
  5. Use a level to ensure that the doorframe is properly aligned before tightening the screws.
  6. If using the optional locking system, ensure it’s securely attached and that all keys are safely stored away in a secure location.
  7. Test the Murphy Door to ensure it opens and closes smoothly without any issues or resistance before declaring its installation complete.
Ensure It Opens and Closes Smoothly

These safety tips will help guide you through a successful installation of your Murphy Door. Always be mindful of the risks and take proper precautions to ensure your safety while installing.

Are There Any Special Considerations When Installing a Murphy Door in a Tight Space? 

Though Murphy doors are designed to fit in tight spaces, there may be some special considerations you need to take into account when installing one. If the door has to open and close around furniture or other objects, consider whether you’ll need an extra hinge or two on either side. This will give your door more flexibility when it comes to opening and closing. Also, make sure you choose the right type of hinges for your door.

If you don’t want the door to swing open too far, look for soft-close or spring-loaded hinges. These will stop the door from swinging too widely, which is important if you have limited space behind it.

Finally, consider getting a Murphy door with an inset handle or sliding mechanism if you have a particularly small space. This way, the handle won’t take up any extra space when the door is closed. Installing a Murphy door may seem like a daunting task but with these considerations in mind, your installation should go smoothly.

What Do You Do if the Door Does Not Fit Properly? 

Installing a Murphy door is not always a straightforward process. If the door does not fit properly, there are several steps you can take to address the issue. First, ensure that all components have been installed correctly and that the opening matches the measurements specified in your installation instructions.

Trimming off a small portion of the door or trimming the opening may be necessary. In some cases, you may have to move the mounting brackets to align the door with the jamb properly.

If these adjustments do not work, you may need to adjust the frame and hinges. Ensure all screws are tightened securely, and no parts are bent. If the door is still not fitting correctly, you may need to replace the hinges or frame. Finally, if all else fails, it may be necessary to have a professional come out and assess the situation. A qualified contractor can evaluate the issue and make sure that your Murphy door is installed properly.

Ensure All Screws Are Tightened Securely

Can You Paint or Stain Your Murphy Door After It Has Been Installed? 

Yes, you can paint or stain your Murphy Door after it has been installed. To do this, first, remove the hinges and door handles from the door frame. Sand down the surface of the door using 220-grit sandpaper to provide a smooth texture for painting or staining.

After sanding, wipe down the entire surface with a damp cloth to remove any dust particles. Next, you will need to apply a base coat of primer so that the paint or stain adheres better and lasts longer. Allow the primer to dry completely before moving on to the next step.

Once the primer is dry, it’s time to apply your chosen paint or stain color. Use a brush and carefully apply the paint or stain in even, consistent strokes. Allow each coat to dry completely before adding additional coats if needed.

Once you’re satisfied with the color, it’s time to reattach the door hinges and handles so that your Murphy Door is ready for use. Make sure to clean up any excess paint or stain so that it will not interfere with the functionality of the door.

Are There Any Special Considerations When Installing a Murphy Door in a Tight Space? 

If you’re installing a Murphy Door in a tight space, there are some things you should keep in mind. It’s important to ensure the door is properly set so it won’t get stuck or jammed when moving. You’ll also want to double-check that your measurements and angles are exact, as small discrepancies can cause big problems during installation.

Installing a Murphy Door in a Tight Space

One of the most important steps in installing a Murphy Door in a tight space is to make sure that you have enough clearance between the door and surrounding surfaces.

If your doorway has a casing or trim, it’s best to install the door before attaching the casings and trims so that you can get an accurate fit. You’ll also need to consider any framing that you’ll have to cut around to fit the door.

When it comes to installation, it’s always best to read through the instructions carefully and start with a level and plumb surface. You’ll want to use shims or wedges if necessary, making sure all of your measurements are accurate before installing the hinges and tracks.


Unfortunately, installing a Murphy door can be labor-intensive and time-consuming. It is not always easy to get the dimensions right and secure the door properly to ensure it opens and closes smoothly. Additionally, it can be difficult to find hardware and other supplies needed for this type of installation. Finally, if the space you are working with is not perfectly square, getting the door and frame in place correctly can be challenging.

In conclusion, installing a Murphy door is an easy and convenient way to add extra storage space or provide access to otherwise unused areas. As long as you have the right tools and supplies, completing the installation should take a few hours.

For best results, follow all of the instructions in your Murphy Door kit carefully, including measuring the door opening and ensuring the door is square before installing. I hope this article has been beneficial for learning how to install murphy door. Make Sure the precautionary measures are followed chronologically.

Photo of author

Adrian Green

Adrian has been interested in woodworking since he was a child. His father had a woodworking shop, and Adrian would help him out and learn from him. He gained basic carpentry knowledge as well as an understanding of how to work hard and take care of business. He enjoys woodworking as a hobby. He loves the feeling of creating something with his own hands, and the satisfaction that comes from seeing his finished products used by others. So he started this blog to spread his passion and knowledge to those interested in DIY wood-working projects. He knows that with a little guidance and practice, anyone can create beautiful pieces of furniture or décor from scratch.

Leave a Comment