As woodstoves have grown in popularity, so has the need to know how to move them safely. Whether you are relocating your woodstove from one area of the house to another or taking it with you when you move, there a few key steps that must be taken for a safe and successful relocation! In this blog post, we’ll discuss all the nuances of moving a woodstove and provide tips on how to make sure you do it safely and effectively – both for yourself and those around you.
Moving a woodstove from one home to another can seem like a daunting task – and, in some cases, it is! However, with the right safety precautions and steps taken to find the most effective way of getting the job done quickly yet safely, you can successfully transport your woodstove without any complications. In this blog post, we will take a look at how to move a woodstove without causing damage or putting yourself at risk of harm.
We’ll discuss valid concerns such as legality issues concerning laws prohibiting moving combustible materials during certain weather conditions as good techniques for safely transporting these heavy stoves over long distances.
After reading this information-packed post on how to move your wood stove correctly and carefully, you’ll have all the knowledge required to ensure successful transportation while staying within applicable regulations.
***
Why May You Want to Move a Woodstove?
1. To change the location of the woodstove
One of the main reasons you may want to move a woodstove is to get it into a better location. Maybe you’re remodeling your home, or maybe you just need the woodstove in a different area of the room for convenience.
2. To make it easier to clean
Another reason you might want to move a woodstove is to make it easier to clean. Woodstoves accumulate a lot of ash and creosote over time, so regularly cleaning the woodstove is important for safety and efficiency. Moving your woodstove makes it much easier to get at all the areas that need to be cleaned.
3. To take it with you
Finally, if you’re moving to a new home, you may want to take your woodstove with you. This is possible, but it does require some special care and attention. Also, depending on the location of your new home, you may need to obtain special permits or install additional safety features for your wood stove.
How to Move a Woodstove in 5 Easy Steps
Now that you know why you might want to move a woodstove, let’s look at how to do it safely and efficiently. There are several steps involved in moving a wood stove.
Step 1: Disconnect the Woodstove From All Fuel Sources and Power Sources
The very first step is to disconnect the woodstove from all fuel sources and power sources. This includes turning off the gas, electricity, and any other source of heat that may be connected. Make sure to use appropriate safety measures when disconnecting the woodstove.
Step 2: Remove All Pieces From Around the Woodstove and Clean It
Once disconnected, you will want to take out any pieces that may be located around or on the woodstove, like ashtrays, grates, etc. You should also clean off any dirt or debris that may have built up over time.
Step 2: Uninstall Any Pipes That Are Connected to Your Woodstove
If there are any pipes that connect to your stove, you will need to temporarily uninstall them and set them aside. Make sure to save any nuts and bolts that you remove. Also, make sure to label the pipes so that you can easily reconnect them.
Step 3: Carefully Lift the Woodstove Out of Its Current Location
Once all fuel sources and pipes are disconnected, you can then carefully lift the wood stove out of its current location. It is important to have at least two people lifting the stove as it can be heavy and awkward to move.
Step 4: Secure the Woodstove for Transportation
Once the stove is out of its current location, it needs to be secured for transportation. The best way to do this is to use a dolly or other moving device that can safely transport the wood stove to its new destination.
Step 5: Reinstall Any Pipes and Connect the Woodstove to Its New Location
Finally, once you have transported the wood stove to its new location, you will need to reinstall any pipes that were uninstalled during step 2. Once this is complete, you can then reconnect the woodstove to all of its new fuel sources and power sources.
Following these five easy steps will ensure that you can safely and efficiently move your wood stove from one location to another. Moving a wood stove is not an easy task, but with the right preparation, it can be done quickly and effectively. Good luck!
10 Additional Tips to Move a Woodstove
1. Do Not Ignore the Weight
Depending on the make and model, a woodstove can range from light to heavy. Be sure to keep in mind how much your particular stove weighs before attempting to move it. Also, make sure you have enough help to safely move the stove and that everyone is wearing proper safety gear.
2. Measure Doorways and Halls
Ensure that the woodstove will fit through all of the doorways, halls, and stairwells. If the measurements don’t match up, then you may need to unscrew or disassemble the stove and then reassemble it in its new location.
3. Choose an Appropriate Path
Make sure that the path you are taking is not blocked by furniture, decorations, or other obstacles. Doing so will ensure a safe and efficient move for your wood stove. Be careful to avoid any sharp objects that the stove may come into contact with.
4. Cover Your Woodstove
To protect your woodstove from scratches and other damage, cover it using a blanket or something else of similar material before moving it. This will also help ensure that no small parts fall off during transit.
5. Have a Gas Shutoff Valve
If your woodstove is connected to a gas line, make sure to turn off the shutoff valve before attempting to move it. This will prevent any dangerous leaks or fires from occurring during transit. Make sure to also turn off the gas line at the source.
6. Secure Doors and Glass
Before attempting to move your woodstove, make sure that all of its doors and glass are securely fastened. This will prevent them from being knocked off or broken during transit. You have to be careful not to over-tighten the screws, as this may cause damage to the door or glass.
7. Have a Backup Plan
If you are moving your woodstove from one area of your home to another, it is always important to have a backup plan in case something goes wrong. You should have an alternative route mapped out just in case the woodstove is too heavy or too large to fit through a doorway.
8. Remove Ashes from Woodstove
Before attempting to move your woodstove, make sure to completely remove all of the ashes from inside it. This will prevent them from spilling out during transit and creating a mess. It is also important to dispose of the ashes properly in a fire-safe container.
9. Protect Your Flooring
When moving your woodstove, make sure to protect your flooring from being scratched or damaged by laying down blankets or cardboard boxes along its path. This will also help minimize any noise that may be caused by the woodstove as it is being moved.
10. Know Your Local Laws
Make sure to check with your local laws and regulations before attempting to move your woodstove. Different areas may have different requirements when it comes to moving a wood stove, so make sure that you are in compliance with them. Failure to do so may result in fines or other penalties.
Following these tips will help make sure that your woodstove is safely and efficiently moved to its new destination with minimal effort and damage. When in doubt, it is always better to err on the side of caution and seek professional assistance if needed. With a little bit of preparation and knowledge, you can move your woodstove with ease. Good luck!
Frequently Asked Question
What Precautions Should be Taken When Moving a Woodstove?
When moving a wood stove, it is important to take safety precautions. Be sure the area around the stove is clear of combustibles and that you have the right equipment to move it safely. Wear thick gloves and use an appliance dolly or hand truck to help lift the stove without straining your back.
Make sure to secure the stove with straps or rope and use a tarp to protect it from scratches or damage during transport. Lastly, be sure to turn off the gas and disconnect any electrical connections before attempting to move the woodstove.
Can You Move a Woodstove Yourself?
Yes, you can move a woodstove yourself. However, it is best to have help from at least one other person due to the size and weight of the stove. Additionally, consider renting an appliance dolly or hand truck to make the process easier and safer. Also, be sure to use proper safety measures during the move.
What Do I Need to Move a Woodstove?
When moving a woodstove, you will need thick gloves, an appliance dolly or hand truck, straps or rope, and a tarp. It is also recommended that you have help from another person due to the size and weight of the stove. Additionally, make sure to turn off the gas and disconnect any electrical connections before attempting to move the woodstove.
Are There Companies That Specialize in Moving Woodstoves?
Yes, there are companies that specialize in moving woodstoves. They will have specialized equipment such as appliance dollies and will be able to safely move and transport the stove for you. It is important to get a reputable company with good reviews in order to ensure the safety of your woodstove during transportation. Also, make sure you get an estimate beforehand to avoid any unexpected costs.
Are There Any Regulations for Moving a Woodstove?
Yes, there are regulations for moving a wood stove. Be sure to check local laws and regulations before attempting to move a wood stove. Additionally, make sure the area around the stove is clear of combustibles and that you have the right equipment to move it safely.
Also, make sure to turn off the gas and disconnect any electrical connections before attempting to move the woodstove. Lastly, be sure to use proper safety measures such as using thick gloves, an appliance dolly or hand truck, straps or rope, and a tarp during the move.
Moving a woodstove can be a difficult process, but with the right equipment and safety measures in place, it is possible to do it yourself. Make sure to check local laws and regulations before attempting to move a woodstove and to always use proper safety precautions when doing so. If you are unsure of how to move the stove safely, consider hiring a professional service that specializes in moving woodstoves.
Conclusion
Moving a woodstove may seem like a daunting task, but if you take the time to plan it out and implement the necessary steps, you can move your woodstove with ease. Remember to take safety precautions at all times, ensuring that you disconnect the flue pipe first and secure any locks or other pieces in place. Be sure to check local codes or ordinances before attempting this project as some require professional installation.
Now you know how to move a woodstove! Lastly, enlist the help of at least two people when moving as it will make the entire process much easier and more efficient. So good luck on your venture – we hope that by following these tips, you’ll be able to safely and successfully move your woodstove!
